After live streaming a teardown of the iPhone 12 and iPhone 12 Pro earlier this week, iFixit today provided a more in-depth teardown that goes through all of the components in the new devices, revealing several similarities between the two. Early testing conducted by iFixit shows that the iPhone 12 and 12 Pro displays are interchangeable and can be swapped without issue, though the max brightness level of the two vary slightly. With just the displays and no other internals removed, the devices look almost identical. Upon removing the camera shield of the iPhone 12, there appears to be a plastic spacer in place of the iPhone 12 Pro’s telephoto lens and LiDAR Scanner. It was confirmed that both the iPhone 12 and iPhone 12 Pro feature the same 2,815mAh battery earlier this week, and iFixit was also able to corroborate this. Additionally, iFixit said the batteries of the two devices are interchangeable. An X-ray courtesy of Creative Electron reveals the nearly identical L-shaped logic board, battery, and circular array of magnets, which introduce MagSafe support, in the two devices. A separate teardown of Apple’s MagSafe charger shared by iFixit reveals a simple design with magnets and a charging coil encircling a small circuit board. The iPhone 12 and iPhone 12 Pro earned a repairability score of 6 out of 10. iFixit said that many components are modular and are easy to replace, but the site bemoaned Apple’s continued use of proprietary screws, the devices’ increases in waterproofing that can complicate repairs, and the increased chance of breakage due to glass on the front and back of the two devices.